For other alternatives, please contact us for more information.

0 Alternative products available

2NN2HH-33B-R4

16-port multibeam antenna, 8x 698–896 MHz, 2x 2-beam 33° HPBW and 8x 1695–2400 MHz, 2x 2-beam 33° HPBW, 4x RET

Find a Partner

Specifications

Finish making your selections or clear them to view relevant specifications.

Features and Benefits

Provides 4T4R capability in low and mid bands
Full spectrum operation for Band 14, AWS, PCS and WCS bands
Twin beam patterns are optimized for minimum beam crossover providing for improved LTE data throughput
Excellent Front-to-Back and SPR performance

Specifications

General Specifications

Antenna Type	Multibeam
Band	Multiband
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Radiator Material	Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	8
RF Connector Quantity, low band	8
RF Connector Quantity, total	16

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface	AISG1 8-pin DIN Female \| AISG1 8-pin DIN Male
RET Interface, quantity	1 female \| 1 male
Input Voltage	10–30 Vdc
Internal RET	High band (2) \| Low band (2)
Power Consumption, active state, maximum	10 W
Power Consumption, idle state, maximum	2 W
Protocol	3GPP/AISG 2.0 (Multi-RET)

Dimensions

Width	640 mm \| 25.197 in
Depth	235 mm \| 9.252 in
Length	1828 mm \| 71.969 in
Net Weight, without mounting kit	57 kg \| 125.663 lb

Array Layout

Click on image to enlarge.

Port Configuration

Click on image to enlarge.

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	698 – 896 MHz \| 1695 – 2400 MHz
Polarization	±45°
Total Input Power, maximum	1,500 W @ 50 °C

Electrical Specifications

Frequency Band, MHz	698–806	824–896	1695–1880	1850–1990	1920–2200	2300–2400
Gain, dBi	13.7	14.8	17.7	18.3	19.1	19.1
Beam Centers, Horizontal, degrees	±27	±27	±27	±27	±27	±27
Beamwidth, Horizontal, degrees	42	35	35	33	32	28
Beamwidth, Vertical, degrees	23.7	21.5	7.7	7.3	6.9	6.3
Beam Tilt, degrees	2–20	2–20	2–12	2–12	2–12	2–12
USLS (First Lobe), dB	15	17	16	17	18	22
Front-to-Back Ratio at 180°, dB	26	29	36	37	36	34
Isolation, Cross Polarization, dB	25	25	25	25	25	25
Isolation, Inter-band, dB	25	25	25	25	25	25
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-153	-153	-153	-153	-153	-153
Input Power per Port at 50°C, maximum, watts	200	200	200	200	200	150

Electrical Specifications, BASTA

Frequency Band, MHz	698–806	824–896	1695–1880	1850–1990	1920–2200	2300–2400
Gain by all Beam Tilts, average, dBi	13.1	14.2	17.0	17.9	18.3	18.5
Gain by all Beam Tilts Tolerance, dB	±0.9	±1	±1	±0.4	±0.8	±1
Beamwidth, Horizontal Tolerance, degrees	±2.7	±3	±2.1	±1.2	±1.9	±1.2
Beamwidth, Vertical Tolerance, degrees	±1.5	±1.1	±0.3	±0.2	±0.4	±0.2
USLS, beampeak to 20° above beampeak, dB			14	16	17	16
Front-to-Back Total Power at 180° ± 30°, dB	21	21	27	29	29	27
CPR at Boresight, dB	17	17	17	19	21	21
CPR at 10 dB Horizontal Beamwidth, dB	6	5	9	13	14	13

Mechanical Specifications

Wind Loading @ Velocity, frontal	764.0 N @ 150 km/h (171.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	251.0 N @ 150 km/h (56.4 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	1,039.0 N @ 150 km/h (233.6 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	787.0 N @ 150 km/h (176.9 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	752 mm \| 29.606 in
Depth, packed	387 mm \| 15.236 in
Length, packed	1982 mm \| 78.032 in
Weight, gross	74 kg \| 163.142 lb

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
UK-ROHS	Compliant

General Specifications

Antenna Type	Multibeam
Band	Multiband
Grounding Type	RF connector inner conductor and body grounded to reflector and mounting bracket
Performance Note	Outdoor usage
Radome Material	Fiberglass, UV resistant
Radiator Material	Low loss circuit board
Reflector Material	Aluminum
RF Connector Interface	4.3-10 Female
RF Connector Location	Bottom
RF Connector Quantity, high band	8
RF Connector Quantity, low band	8
RF Connector Quantity, total	16

Remote Electrical Tilt (RET) Information

RET Hardware	CommRET v2
RET Interface	AISG1 8-pin DIN Female \| AISG1 8-pin DIN Male
RET Interface, quantity	1 female \| 1 male
Input Voltage	10–30 Vdc
Internal RET	High band (2) \| Low band (2)
Power Consumption, active state, maximum	10 W
Power Consumption, idle state, maximum	2 W
Protocol	3GPP/AISG 2.0 (Multi-RET)

Dimensions

Width	640 mm \| 25.197 in
Depth	235 mm \| 9.252 in
Length	1828 mm \| 71.969 in
Net Weight, without mounting kit	57 kg \| 125.663 lb

Electrical Specifications

Impedance	50 ohm
Operating Frequency Band	698 – 896 MHz \| 1695 – 2400 MHz
Polarization	±45°
Total Input Power, maximum	1,500 W @ 50 °C

Electrical Specifications

Frequency Band, MHz	698–806	824–896	1695–1880	1850–1990	1920–2200	2300–2400
Gain, dBi	13.7	14.8	17.7	18.3	19.1	19.1
Beam Centers, Horizontal, degrees	±27	±27	±27	±27	±27	±27
Beamwidth, Horizontal, degrees	42	35	35	33	32	28
Beamwidth, Vertical, degrees	23.7	21.5	7.7	7.3	6.9	6.3
Beam Tilt, degrees	2–20	2–20	2–12	2–12	2–12	2–12
USLS (First Lobe), dB	15	17	16	17	18	22
Front-to-Back Ratio at 180°, dB	26	29	36	37	36	34
Isolation, Cross Polarization, dB	25	25	25	25	25	25
Isolation, Inter-band, dB	25	25	25	25	25	25
VSWR \| Return loss, dB	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0	1.5 \| 14.0
PIM, 3rd Order, 2 x 20 W, dBc	-153	-153	-153	-153	-153	-153
Input Power per Port at 50°C, maximum, watts	200	200	200	200	200	150

Electrical Specifications, BASTA

Frequency Band, MHz	698–806	824–896	1695–1880	1850–1990	1920–2200	2300–2400
Gain by all Beam Tilts, average, dBi	13.1	14.2	17.0	17.9	18.3	18.5
Gain by all Beam Tilts Tolerance, dB	±0.9	±1	±1	±0.4	±0.8	±1
Beamwidth, Horizontal Tolerance, degrees	±2.7	±3	±2.1	±1.2	±1.9	±1.2
Beamwidth, Vertical Tolerance, degrees	±1.5	±1.1	±0.3	±0.2	±0.4	±0.2
USLS, beampeak to 20° above beampeak, dB			14	16	17	16
Front-to-Back Total Power at 180° ± 30°, dB	21	21	27	29	29	27
CPR at Boresight, dB	17	17	17	19	21	21
CPR at 10 dB Horizontal Beamwidth, dB	6	5	9	13	14	13

Mechanical Specifications

Wind Loading @ Velocity, frontal	764.0 N @ 150 km/h (171.8 lbf @ 150 km/h)
Wind Loading @ Velocity, lateral	251.0 N @ 150 km/h (56.4 lbf @ 150 km/h)
Wind Loading @ Velocity, maximum	1,039.0 N @ 150 km/h (233.6 lbf @ 150 km/h)
Wind Loading @ Velocity, rear	787.0 N @ 150 km/h (176.9 lbf @ 150 km/h)
Wind Speed, maximum	241 km/h (150 mph)

Packaging and Weights

Width, packed	752 mm \| 29.606 in
Depth, packed	387 mm \| 15.236 in
Length, packed	1982 mm \| 78.032 in
Weight, gross	74 kg \| 163.142 lb

Click on image to enlarge.

Regulatory Compliance/Certifications

Agency	Classification
ISO 9001:2015	Designed, manufactured and/or distributed under this quality management system
ROHS	Compliant
CHINA-ROHS	Below maximum concentration value
UK-ROHS	Compliant